calc_container_cost_from_item
(qs, args=u'')
Calculate Container Cost From item
The sum of all the allocation packed quantity x inventory item unit cost for a container.
None
calc_container_cost_from_order
(qs, args=u'')
Calculate Container Cost From Order - The sum of all the allocation packed quantity x order detail
cost for a container.
None
company_name_address(qs, args=u'')
Company Address Fields - generates an address in the following format:
company_facility_name company_facility_address company_facility_address2 company_facility_city, company_facility_state company_facility_zip company_facility_country
None
container_mod_time(qs=None, args=u'%d/%m/%Y - %H:%M')
Container Modified Time - The container modified time and date when the document or label is printed based on the container modified time zone
location.
destination_company_name_address (qs, args=u'')
Order Destination Company Address Fields - generates an address in the following format:
destination_company_name destination_company_address destination_company_address2 destination_company_city, destination_company_state destination_company_zip destination_company_country
None
destination_facility_name_address (qs, args=u'')
Order Header Destination Facility Address Fields - generates an address in the following format:
facility_name facility_address facility_address2 facility_city, facility_state facility_zip facility_country
None
determine_sku_single_or_multi
(qs, args=u'')
Determine Sku Single Or Multiple - looks at the iblpn to see if it is single sku in which case it
says single sku iblpn or if it is multi sku then it will say multisku iblpn.
None
facility_shipfrom_name_address
(qs, args=u'')
None
facility_time (qs=None, args=u'd/%m/%Y - %H:%M')
Date Format String. http://strftime.org/ Default: "%d/%m/%Y - %H:%M"
get_container_num_for_item_single_sku_on_order (qs, args=u'')
Get Container Number For Item Single Sku On Order - This is only for labels or documents that are container based. This would not make sense for an order label for instance. Checks to make sure the status is Packed or Higher but not
cancelled.
Checks to make sure the Allocation is in Completed status. This function gets what container number out of the total
number of containers on an order with regards to an item.
None
get_country_code (code=u'US')
Get Country Code
Pass in any form of United States or Canada and get back the 2 letter country code.
code Default: 'US'
Only Use With
Expressions
get_country_name (code=u'US')
code Default: 'US'
Only Use With
Expressions
get_display_string (qs=None, args=u'')
get_ib_shipment_ids_from_vendor_code(vendor_code=u'')
: vendor_code Default: ''
Only Use With
Expressions
get_julian_day(date_str, args=u'%Y-%m-%d')
get_maxi_class_of_service(indicator)
indicator Default: None
Only Use With
Expressions
get_maxicode(qs, args=u'')
get_num_containers_for_item_single_sku_on_order(qs, args=u'')
Get Container Number For Item Single Sku On Order - This is only for labels or documents that are container based. This would not make sense for an order label for instance. Checks to make sure the status is Packed or Higher but not
cancelled. Checks to make sure the Allocation is in Completed status. This function gets the total number of containers on an order with regards to an item.
get_pre_pack_location(qs, args=u'')
get_pre_pack_part_range(qs, args=u'')
Get Pre Pack Part Range - Based on the values in the PRE_PACK_VARIABLE_PARTS
company parameter, these are excluded from the parts seperated by a - that shows all of the child parts that make up this prepack.
get_pre_pack_part_range_fields(qs, args=u'')
get_pre_pack_ratio_range(qs, args=u'')
get_store_nbr(qs, args=u'')
get_total_cases_ob_containers(qs, args=u'')
get_total_num_containers(qs, args=u'')
Get Total Number Containers Looks at the allocation from inventory container pallet and for
all containers that are less than shipped status it counts them and returns the number of containers.
get_total_num_containers_on_load(qs, args=u'')
get_total_num_out_bound_ready_containers_on_order(qs, args=u'')
get_total_num_packed_containers_on_order(qs, args=u'')
get_total_num_packed_items_on_order(qs, args=u'')
get_total_packs_ob_containers(qs, args=u'')
get_total_qty_for_lpn_with_prepacks(qs, args=u'')
get_total_qty_ob_containers(qs, args=u'')
get_total_weight_packed_containers_on_order(qs, args=u'')
Get Total Weight Packed Containers On Order Checks to make sure the status is Packed or Higher but not
cancelled. This function gets the total Weight of the containers on the order.
get_ups_routing_code(zip_code, country_code=u'US')
zip_code, country_code Default: zip_code = None, country_code = 'US'
Only Use With
Expressions
get_us_state_code(code=u'')
code Default:
Only Use With
Expressions
get_us_state_name(code=u'')
Get State Name Pass in 2 letter state code and get back the state name.
Arguments:
code Default:
Only Use With
Expressions
get_x_of_y_for_container_on_load(qs, args=u'')
Get X Of Y For Container On Load This is only for labels or documents that are container based. This would not make sense for an order label for instance. Checks to make sure the status is Out Bound Ready, In Packing, Packed, Loaded, or Shipped. This function gets what container number out of the total
number of containers on an order.
get_x_of_y_in_out_bound_ready_containers_on_order(qs, args=u'')
Get X Of Y In Packed Containers On Order
This is only for labels or documents that are container based.
This would not make sense for an order label for instance.Checks to make sure the status is Packed or Higher but not cancelled.
This function gets what container number out of the total number of containers on an order.
is_carrier_ups(qs, args=u'')
is_shipvia_fedex_express(qs, args=u'')
is_shipvia_fedex_ground(qs, args=u'')
is_shipvia_fedex_smartpost(qs, args=u'')
order_header_cust_name_address(qs, args=u'')
Order Header Customer Address Fields
generates an address in the following format:
customer_name
customer_address
customer_address2
customer_city, customer_state
customer_zip customer_country
order_header_shipto_name_address(qs, args=u'')
Order Header ShipTo Address Fields
generates an address in the following format:
shipto_name
shipto_address
shipto_address2
shipto_city, shipto_state
shipto_zip shipto_country
shipto_facility_name_address(qs, args=u'')
Order Header ShipTo Facility Address Fields
generates an address in the following format:
shipto_facility_name
shipto_facility_address
shipto_facility_address2
shipto_facility_city, shipto_facility_state
shipto_facility_zip shipto_facility_country
wave_time(qs=None, args=u'%d/%m/%Y')
Arguments:
Date Format String. http://strftime.org/
Default: "%d/%m/%Y - %H:%M"
get_lowest_location_by_location_pick_seq
get_lowest_pick_zone_by_location_pick_seq
Get Lowest Pick Zone By Location Pick Sequence- Returns the location string of the lowest pick zone by location
pick sequence
get_total_ib_shipment_container_qty
rename_oblpn_nbr_once